---
title: " Dieline Parameter Configuration"
url: "https://help.manageartworks.com/en/article/dieline-parameter-configuration"
language: "en"
last_updated: "2026-03-09T03:43:11.941Z"
---

#  Dieline Parameter Configuration

The **Dieline Parameter Configuration** section allows you to define the default settings used for dielines in the Web Viewer.

Using this configuration, you can:

-   Set the default Unit of Measurement (UOM)
-   Define the default Bleedline Thickness
-   Configure acceptable Asset Types for Dieline files
-   Configure acceptable Asset Types for Artwork files

These settings control how dielines and artwork behave during linking and overlay validation.

## Configure Dieline Parameter Settings

### 01\. Access Dieline Parameter Configuration

1.  Sign in to your [ManageArtworks](https://app.manageartworks.com/karomi/global/build/login) account.
2.  Select the **Admin** module.
3.  Under the **Web Viewer** section, select **Dieline Parameter Configuration**.

![](https://cdn-assets.productfruits.com/45abb706-eb19-47cf-9b53-4053c66817f0)

### 02\. Configure the Dieline Parameters

| Parameter | Description | Allowed Values / Notes |
| --- | --- | --- |
| **Unit of Measurement** | Select the default measurement unit used for dielines. | mm, cm, in |
| **Bleedline Thickness** | Define the default bleed thickness applied to dielines. | mm: 2.00 – 6.40 mm, cm: 0.20 – 0.64 cm, in: 0.08 – 0.25 in |
| **Asset Type for Dieline** | Select the asset types that should be treated as Dieline files. Only selected types can be linked as a dieline. | Example: KLD-3D, Cutter Guide |
| **Asset Type for Artwork** | Select the asset types that should be treated as Artwork files. Only selected types will trigger Overlay Check when linked with a dieline. | Example: Packaging Artwork, 3D File |

![](https://cdn-assets.productfruits.com/8fc01a7e-f8a8-4e65-b567-3799f952906c)

### 03\. Save and Publish

In **Dieline Parameter Configuration**, saving and publishing are handled automatically.

Once you configure the parameters, it is auto-saved and immediately available for use in projects. There is no separate Publish action required.

Changes will **not** automatically update projects that are already in progress.

The updates will apply only to projects where the template is used **after** the modification.